Controlling The Real World With Computers
::. Control And Embedded Systems .::
The Arduino Version
Table Of Contents

Updated February 10, 2016

01 - How to Read a Schematic And Basic Electronics

02 – Test Answers for How to Read a Schematic & Basic Electronics

03 - Programming Part 1 - The C Programming Language - Flowcharting, Commenting, Arduio Sketches, Object Naming, Setup() and loop(), for Loops, switch(), Blink, Chase, etc.

04 - Data lines, bits, nibbles, bytes, words, binary and HEX

05 - Answers For Data lines, bits, nibbles, bytes, words, binary and HEX Test

06 - Boolean Logic - AND, OR, XOR, NAND, NOR, NXOR

07 - Answers for Boolean Logic Test

08 - Programming Part 2 - More interesting Chase, using more LEDs, delay(), using arrays, introduction to fading rather than blinking LEDs with Pulse Width Modulation

09 - Programming Part 3 - Fading programs, fading 5 LEDs up and down in sequence using Pulse Width Modulation

10 - Programming Experiment 1 - The RGB LED, 3-in-one, Red,Green and Blue in a single package, using the ThreeSweep program to fade the three colors up and down in brightness, producing many colors, using analogRead(..) to get values from a control to change the brightness of the three LEDs in the RGB LED

11 - Programming Experiment 2 - Basics of the DC electric motor,and using Pulse Width Modulation to control motors, using a MOSFET to provide the power to run a motor

All Contents Copyright © 2000 - 2015, Joe D. Reeder. All Rights Reserved.

joe.yt1944acct@gmail.com